Jobo Designs

Letting the crafty creative juices flow. Knitting, spinning, crafting, dyeing, rabbits, sheep and more!

3. December 2010 11:59
by Jobo

That's no "Cop" out...

3. December 2010 11:59 by Jobo | 0 Comments

I've come up with a unique way (or at least I've never seen anyone else do it this way... so I thought I should share) to unwind a full cop of singles from my drop/supported spindles...

Basically here it is in a nutshell:

- It can take a very long time to unwind a full cop by hand into a ball for plying or for storage.  I always end up frustrated, often tangled, and bored with all of the repetitive winding.  I'd rather be spinning or knitting!

- My solution is to wind the spindle's contents off onto a spare spinning wheel bobbin, where it can be kept until plying/finishing, in a neat and orderly compact form.  I can then take the bobbin and wind a plying ball if I want, I can ply directly from several bobbins on my lazy Kate, or in the case of something like silk singles, I can wind directly from the bobbin to the niddy noddy for finishing.  The best part is that I can have my spindle back right away to start on the second cop if I wish, and deal with the finishing of the singles later on.

- I can set up my Ashford Traveller such that the drive band is around the bobbin only, and the bobbin will basically wind up the yarn from the spindle (without adding or removing any twist from the single) - and it can wind much faster than I can by hand.

- it was obvious that my supported spindles will stand comfortably in a bowl while I wind with the wheel... but I discovered that my suspended spindles (aka my goldings and other pretty toys) will stand on their hooks and spin in the palm of my hand quite freely.  It's like holding a spinning top!  ... and it tickles a little!

- Please check out the video... I think pictures say things easier than words sometimes!

I hope this technique helps spinners out there to wind singles more efficiently - More spinning and knitting time for all! (and let them all have cake also.  the end.)

7. May 2010 19:24
by Jobo

Plain Vanilla Socks... Gemstone Color!

7. May 2010 19:24 by Jobo | 0 Comments

Opal RainforestAfter the craziness (and also wonderfulness) that was Sock Wars and Iron Knitter... I have been knitting quite a few "simple" projects.  I think I might have burned myself out on all of the challenging patterns maybe?  I think I am starting to get my mojo back though, because I am craving knitted lace...  I think it's just a matter of time before I jump back on that horse!

In my last Webs order I snagged a Ball of Opal Rainforest - a nice self patterning yarn.  I had read before that Opal was a workhorse sock yarn, with excellent quality and durability, so when I saw some pretty colors on sale I jumped at the chance.  It isn't exactly distinct stripes, but sort of stretches of color in a loosely defined pattern.  You will see what I mean later on...

In the ball, the yarn feels nice and wooly, but still squishy, and definetly not scratchy.  The colors range from white, to grey, to dark green, and dark blue, teal, and everything in between. 


As you can see, this pair isn't exactly identical, but both have similar distribution of color.  I really like the way they turned out, and the way that the subtle color changes kept me interested throughout the project.  I have always really enjoyed watching variegated colors fly through my hands.

The pattern itself is just a variation of my usual toe-up socks with 64 stitches to the round.  I'm getting comfortable enough with toe-up these days that I can just wing-it to work the gussets and heel turn.  Basically it ends up being similar to a Wendy Johnston toe-up heel, just usually with slightly different numbers. 

For the Cuffs though I tried something new this time though... What's that you say?  they look like plain boring 2x2 ribbing cuffs?  Well Yes, Certainly they are!  The difference is that I worked them via the Magic Loop Method - on a circular needle!

I was just arriving at the cuffs when my latest shipment of Knit Picks goodies landed in the mailbox.  So I took the opportunity to try working in the round on circs for something easy to start out with.  It took me a little while to get comfortable with the length of the cable, and which way to manipulate it to keep it out of my way, but it was actually easier than I thought! 

The needle itself was a 2.5 mm circular with the 40 inch cable (Options Nickel Plated Fixed Circular Needle).  I was surprised at just how flexible the electric purple cable actually was... next pair of socks I try will be done completely Magic Loop :)

5. May 2010 11:12
by Jobo

Fulling and Whacking? Using Felting to Your Advantage

5. May 2010 11:12 by Jobo | 3 Comments

every time I think of long color gradients... my mind automatically goes back to the "Cake" song "Short Skirt, Long Jacket"  only of course with a looooong loooooooooong jacket color gradient.


Here is a first peek at my singles off the bobbin.  I am always amazed at the way spun singles seem to kink up at even intervals when you take the skein off of the niddy noddy...  Little loops and twists and flips.  I have one XL bobbin of singles that range from black through to medium green, and I have all of the fiber prepped for the progression of medium green through to pale lemon/lime.  I hope to finish those sometime this week.  (This weekend time was not on my side)


I am finding it very difficult to photograph this yarn for some reason.  The greens just don't show up the right shade, and the Black looks almost blue here, but in person it's more like coal.  I think it might be time for a new camera over here in casa-de-Jobo...  maybe for Christmas next year? 

I forgot to measure the WPI of my singles, but I was aiming for around the size of a complete (2ply) strand of Knit Picks Shadow Lace.  I want to knit something light and lacy from this, similar to the Swallowtail Shawl I made from Polwarth singles last year (click here to see the post about it!)  I love how light and feminine that shawl is, and though it feels thin, it is quite warm.  I am leaning towards the "Shetland Triangle" for this yarn... or maybe a Multnomah?

After skeining the singles... I decided to try "fulling" it - with the goal of semi felting the singles so they would puff up and hold together better.

Fulling - is a process where the spinner uses heat, agitation and moisture to finish yarn.  Basically you are using the wool's feltability to your advantage.  With a single ply yarn, the fibers are twisted around each other which provides some strength to the thread, but basically without the multiple ply advantage, singles can be weak and drift apart.  There is a delicate balance between having a single that has enough twist to hold together, yet not so much twist that it kinks and curls over on itself.  This idea has many advantages, but also has a few drawbacks.

Working out the Kinks!  Sometimes just washing the yarn in warm water can be enough to set the twist... so that the finished yarn has an appropriate balance.  In the case of my singles yarn, I definetly wanted to relax the kinking and twisting.  The yarn bath helped this a lot.  If the yarn remained kinky after it's soak and bath, I had planned on putting a weight at the end of the skein to stretch it out a bit during the drying.  it turns out that I really didn't need to do that this time.  After a yarn has been washed and dried, the fiber puffs up and feels rounder and lighter.  By relaxing a little of the twist, the yarn has a nicer feel and the fiber itself does too!

temperature shock Hot and Cold Water?  Won't this wreck the yarn?  The first thing one learns about wool is that it turns to felt if you treat it the wrong way.  You are never supposed to expose wool to harsh temperature changes.  So why would someone want to dunk and swish yarn in Hot water and then Cold water?  My goal here was to actually promote a little bit of felting in this yarn!  Of course, like anything else, this should be done in moderation.  I chose to fill both sides of my kitchen sink (one hot and one cold) and I soaked and squished the yarn gently moving it back and forth from one side to the other.  I think I went back and forth about 3 times (Hot, Cold, Hot, Cold, Hot, Cold) and then gently wrapped in a towel and squeezed dry.  I was worried that my yarn would become a useless lump of felted strings, but I think I managed a happy medium and just got a nice felty balance.  One thing I really noticed was the amount of shrinkage in the length of the skein.  After the yarn was dry, I tried to replace it on the niddy noddy just to see if it had shrunk much.  The skein was about an inch too short to go back on comfortably.  I hope this means that my yarn felted and shrank into itself just enough to become stronger and more cohesive.

Agitated?  Says Who?  I Feel Fine...  Another rule of acceptable wool treatment is to avoid agitation and rubbing when it is wet.  Nasty things have happened to wool garments, even in cool water on the gentle cycle of the washing machine.  In the case of fulling, a little agitation can be good!  When the yarn was soaking in both the cool and hot baths, I gently swished around the yarn.  The fibers rubbing up against each other helped to soften and smooth the edges of the single (from a tight twisted feel to a more woolen and rounded feel)  After the yarn was towel dried I also took the opportunity to "Whack" the skein while it was damp to continue this softening process.  For me, whacking is basically holding one end of the skein and hitting the opposite end of it on my smooth wooden bannister a couple dozen times, and then alternating to the other end of the skein and repeating.  My husband generally looks at me funny when I'm doing this (beating the bannister with a skein of wet yarn... honey? are you ok?)  but I find it does help a gentle halo to form, especially when I'm working with angora or mohair.  For Plain wool, you don't really get a halo per se, but the yarn feels more poofy.  Try it, you will see what I mean.


Here is a closeup of the finished, dried, fulled, whacked, exhausted, Singles!  I can't wait to finish the second skein, ball it up, and get knitting :)

Powered by BlogEngine.NET | Theme: Yoko by Elmastudio, adapted by onesoft